Maco Multipoint Door Lock 2 Hook 2 Cam 45mm Backset New CTS Version

In stock
Gref
2963
£87.77
Maco Multipoint Door Lock 2 Hook 2 Cam 45mm Backset New CTS Version is available to buy in increments of 1

Maco CTS version door lock with 2 hooks and 2 roller cams. This is a 45mm backset with a 16mm faceplate & also offers a split spindle to the centre gearbox should an external key only entry requirement be required.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Maco CTS Door Lock Multipoint 2 Hook 2 Roller Cams 45mm Backset Upvc 16mm Faceplate

  • A - Spindle to Key: 92mm
  • B - Backset: 45mm
  • C - Op Type: Lever/Lever or Lever/Pad via split spindle
  • D - Locking Points: 2 Hooks and 2 Roller Cams
  • E - Faceplate Dimension: 16mm

What You Will Receive:

1 X Full length locking mechanism

Fitting tip: If you are replacing the older versions of roller cam locks, which are now obsolete and superseeded with this newer Version CTS here, you will find that Maco have now altered the hook lock box, the roller cam positions slightly and the shape of the centre gearbox. However, the new lock will with only a little work routing for their new locations and undoing the frame keeps and moving them to suit the new lock points which are held in place with screws and is relatively easy to do.

The overall length of the lock faceplate shown can be trimmed down at the ends with a hacksaw to suit the length of your door.

What is a Split Spindle Gearbox Option?

Split Spindle Night Lock Operation: This lock has a spindle which is in fact 2 spindles sat one on top of the other and seperated by a thin shim of metal. This allows them to work independantly of each other when fitted with the correct spindle set. In most cases people use handles with a solid square bar spindle that goes through the gearbox spindle both inside and outside in one piece. This means that they operate the same both sides of the handle therefore assuming the key cylinder is unlocked you pull the handle down and the latch retracts and you open the door.

If you wish to make the external a key holder only access you achieve this by putting a purpose made split spindle pack into the each side of the lever handles (the split spindle pack must be made to suit the specific lock gearbox been used). The inside part of the handle lever will move all the roller cams and also retract the latch when pulled down meaning you can open the door.

However, the external lever side uses the opposite side of the spindle due to the fitted split spindle pack. This outer spindle never retracts the latch. Instead, you have to also turn the key in the cylinder to retract the latch meaning only key holders can enter the property without your knowledge. So if you come home and open the door once closed behind you no one can enter unless a key holder. This is called a split spindle door lock night lock operation and is to suit inline lever door handles only. It is different to an offset door handle mechanism.

More Information
Gref 2963
Brand Maco
Mechanism Type Full Lock
PZ (Spindle To Key) 92mm
Backset 45mm
Rollers 2
Hooks 2
Deadbolts 1
Faceplate Dimensions 16mm
Write Your Own Review
You're reviewing:Maco Multipoint Door Lock 2 Hook 2 Cam 45mm Backset New CTS Version
Your Rating