Yale Asgard Upvc Door Lock Case Gear Box 35mm Backset 7025 7026 7035

In stock
Gref
2291
£62.20
Yale Asgard Upvc Door Lock Case Gear Box 35mm Backset 7025 7026 7035 is available to buy in increments of 1

This is the Yale Asgard 35mm Backset 7025 7026 or 7035 Upvc multipoint door lock mechanism centre case gear box. Quite often used on Composite and timber doors and has a hook lock to the centre rather than a deadbolt. The faceplate was sometimes stamped with 7025, 7026 or 7035 which were all variations of the full length door lock however they all used the same centre gearbox.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Yale Asgard 7025 7026 or 7035 Upvc Door Lock Case Gear Box Match 35mm Backset Twin Spindle Type

  • Spindle to Key: 92mm / 70mm
  • Backset: 35mm
  • Op Type: Lever/Lever or Lever/Pad using the lower spindle to make the outside a key only access lock operated if required
  • Locking Points: Connects to full length locking points
  • Faceplate Dimension: 16mm or 20mm when connected to full lock plate

What You Will Receive:

1 X Centre Gearbox

This Yale 7025, 7026 or 7035 Asgard Door Lock Case with 35mm Backset allows you to use a Lever/Lever handle or a Lever/Pad handle. This lock has a twin spindle. When the lower spindle is used the separate spindle allows the door lock to be locked and unlocked but does not operate the latch on the gearbox from outside without turning the key. The internal handle will operate both the locks and the latch without the need to use the key because it uses the highest (92mm PZ) top one.

You may find that most companies only use the top spindle to operate the door which will then operate exactly the same inside and outside (this is the most common use).

Please note that this lock gearbox replacement will come without the white plastic inserts which were used purely to hold the latch button in place. Yale no longer use this facility on their door locks. However, you can reuse the old existing ones if you wish to do so. Not fitting them will have no detrimental effect to the lock system.

More Information
Description

Yale Asgard 7025 7026 or 7035 Upvc Door Lock Case Gear Box Match 35mm Backset Twin Spindle Type

  • Spindle to Key: 92mm / 70mm
  • Backset: 35mm
  • Op Type: Lever/Lever or Lever/Pad using the lower spindle to make the outside a key only access lock operated if required
  • Locking Points: Connects to full length locking points
  • Faceplate Dimension: 16mm or 20mm when connected to full lock plate

What You Will Receive:

1 X Centre Gearbox

This Yale 7025, 7026 or 7035 Asgard Door Lock Case with 35mm Backset allows you to use a Lever/Lever handle or a Lever/Pad handle. This lock has a twin spindle. When the lower spindle is used the separate spindle allows the door lock to be locked and unlocked but does not operate the latch on the gearbox from outside without turning the key. The internal handle will operate both the locks and the latch without the need to use the key because it uses the highest (92mm PZ) top one.

You may find that most companies only use the top spindle to operate the door which will then operate exactly the same inside and outside (this is the most common use).

Please note that this lock gearbox replacement will come without the white plastic inserts which were used purely to hold the latch button in place. Yale no longer use this facility on their door locks. However, you can reuse the old existing ones if you wish to do so. Not fitting them will have no detrimental effect to the lock system.

Gref 2291
Choose Colour White Patio Handle Slim Ext Side
Brand Yale
Mechanism Type Gearbox Centre Case Only
PZ (Spindle To Key) 92mm
Backset 35mm
Rollers 0
Mushrooms 0
Hooks 1
Pinbolts 0
Deadbolts 0
Write Your Own Review
You're reviewing:Yale Asgard Upvc Door Lock Case Gear Box 35mm Backset 7025 7026 7035
Your Rating