GU Ferco Upvc Door Lock 4 Roller Suit 3.28 5.28 6.28 28mm Backset 70pz

In stock
Gref
145
£82.77
GU Ferco Upvc Door Lock 4 Roller Suit 3.28 5.28 6.28 28mm Backset 70pz is available to buy in increments of 1

GU Ferco 4 Cam 28mm Backset 70mm PZ will replace door locks with 3.28, 5.28 and 6.28 stamped on faceplate with a Upvc Multipoint door lock mechanism. This full length door lock replaces the original which sometimes had 2 mushroom cams with new designed gearbox.

GU Ferco 4 Cams 28mm Bset 70pz Ferco Suits 3.28 5.28 6.28 Replacement Upvc Door Lock New Designed Gearbox

A - Spindle to Key: 70mm
B - Backset: 28mm
C - Op Type: Lever/Lever
D - Locking Points: 4 rollers
E - Face Plate Dim: 16mm*

*Some old faceplates were stamped Ferco 5:28 and have a 7mm spindle width.

What You Will Receive:

1 X Full length locking mechanism

This is the new styled gearbox made by GU and is to the same specification and fits in the door just the same as the old exisisting one 

N:B if using this lock to replace the old Fuhr 70mm pz door locks you will also need to fit 

a 7mm spindle to suit the new GU lock and also the spindle shims on each end to take up the 1mm slack in the exisisting Fuhr door handles you have Please type Part 1414-1659 in the search tab at the top of the page. You can then choose 1 x 7mm spindle and 1 x shim pair. Lastly you may find your handles to be slightly filed round the cylinder escutcheon cut out to fit easily over the cylinder as many old Fuhr handles had the unusual 72mm pz dimension rather than the 70mm used by GU.

N:B: If you have a lock with only 2 rollers (sometimes stamped 3:28) this is now obsolete and you will need to ignore the 2 extra rollers when fitting this lock or order 2 roller keeps (Gref: 870) which will increase security. All other items remain the same. The overall length of the lock faceplate shown can be trimmed down at the ends with a hacksaw to suit the length of your door.

More Information
Description

GU Ferco 4 Cams 28mm Bset 70pz Ferco Suits 3.28 5.28 6.28 Replacement Upvc Door Lock New Designed Gearbox

A - Spindle to Key: 70mm
B - Backset: 28mm
C - Op Type: Lever/Lever
D - Locking Points: 4 rollers
E - Face Plate Dim: 16mm*

*Some old faceplates were stamped Ferco 5:28 and have a 7mm spindle width.

What You Will Receive:

1 X Full length locking mechanism

This is the new styled gearbox made by GU and is to the same specification and fits in the door just the same as the old exisisting one 

N:B if using this lock to replace the old Fuhr 70mm pz door locks you will also need to fit 

a 7mm spindle to suit the new GU lock and also the spindle shims on each end to take up the 1mm slack in the exisisting Fuhr door handles you have Please type Part 1414-1659 in the search tab at the top of the page. You can then choose 1 x 7mm spindle and 1 x shim pair. Lastly you may find your handles to be slightly filed round the cylinder escutcheon cut out to fit easily over the cylinder as many old Fuhr handles had the unusual 72mm pz dimension rather than the 70mm used by GU.

N:B: If you have a lock with only 2 rollers (sometimes stamped 3:28) this is now obsolete and you will need to ignore the 2 extra rollers when fitting this lock or order 2 roller keeps (Gref: 870) which will increase security. All other items remain the same. The overall length of the lock faceplate shown can be trimmed down at the ends with a hacksaw to suit the length of your door.

Gref 145
Choose Colour White Patio Handle Slim Ext Side
Brand GU Ferco
PZ (Spindle To Key) 70mm
Backset 28mm
Rollers 4
Mushrooms 0
Hooks 0
Pinbolts 0
Deadbolts 0
Faceplate Dimensions 16mm
Write Your Own Review
You're reviewing:GU Ferco Upvc Door Lock 4 Roller Suit 3.28 5.28 6.28 28mm Backset 70pz
Your Rating