GU Ferco Upvc Door Lock 4 Cam 35mm Backset 70pz 6.35 3.35 or 4.35 Match

In stock
Gref
147
£95.61
GU Ferco Upvc Door Lock 4 Cam 35mm Backset 70pz 6.35 3.35 or 4.35 Match is available to buy in increments of 1

This is the GU Ferco 4 Cam 35mm Backset 70mm PZ 6.35 or 3.35 replacement UPVC Multipoint door lock mechanism. The full length UPVC door lock replaces the original which sometimes had 2 mushroom cams.

GU Ferco 4 Cam 35mm Backset 70mm PZ Ferco or 6.35, 4.35 or 3.35 Replacement Match

  • A - Spindle to Key: 70mm
  • B - Backset: 35mm
  • C - Op Type: Lever/Lever
  • D - Locking Points: 4 Rollers
  • E - Faceplate Dimension: 16mm

What You Will Receive:

1 X Full length locking mechanism

Some of the old faceplates were stamped Ferco 6.35 with a 7mm spindle width.

N:B If using this lock to replace the old Fuhr 70mm PZ door locks then you will also need to fit a 7mm spindle to suit the new GU lock. You will also need the spindle shims on each end to take up the 1mm slack in the exisisting Fuhr door handles you have. Our part reference for this is 1414-1659. You can then choose 1 x 7mm spindle and 1 x shim pair. Lastly you may find your handles to be slightly filed round the cylinder escutcheon cut out to fit easily over the cylinder as many old Fuhr handles had the unusual 72mm pz dimension rather than the 70mm used by GU.

N:B: If you have a lock with only 2 rollers (sometimes stamped 3.35 or 4.35) this is now obsolete and you will need to ignore the 2 extra rollers when fitting this lock. Alternatively, you can order 2 rollers keeps (our part reference 870) which will increase security. All other items remain the same.

The overall length of the lock faceplate shown can be trimmed down at the ends with a hacksaw to suit the length of your door.

More Information
Description

GU Ferco 4 Cam 35mm Backset 70mm PZ Ferco or 6.35, 4.35 or 3.35 Replacement Match

  • A - Spindle to Key: 70mm
  • B - Backset: 35mm
  • C - Op Type: Lever/Lever
  • D - Locking Points: 4 Rollers
  • E - Faceplate Dimension: 16mm

What You Will Receive:

1 X Full length locking mechanism

Some of the old faceplates were stamped Ferco 6.35 with a 7mm spindle width.

N:B If using this lock to replace the old Fuhr 70mm PZ door locks then you will also need to fit a 7mm spindle to suit the new GU lock. You will also need the spindle shims on each end to take up the 1mm slack in the exisisting Fuhr door handles you have. Our part reference for this is 1414-1659. You can then choose 1 x 7mm spindle and 1 x shim pair. Lastly you may find your handles to be slightly filed round the cylinder escutcheon cut out to fit easily over the cylinder as many old Fuhr handles had the unusual 72mm pz dimension rather than the 70mm used by GU.

N:B: If you have a lock with only 2 rollers (sometimes stamped 3.35 or 4.35) this is now obsolete and you will need to ignore the 2 extra rollers when fitting this lock. Alternatively, you can order 2 rollers keeps (our part reference 870) which will increase security. All other items remain the same.

The overall length of the lock faceplate shown can be trimmed down at the ends with a hacksaw to suit the length of your door.

Gref 147
Choose Colour White Patio Handle Slim Ext Side
Brand GU Ferco
PZ (Spindle To Key) 70mm
Backset 35mm
Rollers 4
Mushrooms 0
Hooks 0
Pinbolts 0
Deadbolts 0
Faceplate Dimensions 16mm
Write Your Own Review
You're reviewing:GU Ferco Upvc Door Lock 4 Cam 35mm Backset 70pz 6.35 3.35 or 4.35 Match
Your Rating