Free UK Delivery* Available

Upvc Rubber Gasket Bubble Weather Draught Seal Window Door White

In stock

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10+ save 15%
  • Large Stock
  • Free UK
  • Expert

Rubber Upvc Door or Window Gasket Weather Draught Seal White Colour 4066

This white rubber gasket, either as a bubble shape can be used to replace the worn out or damaged rubber gaskets commonly found on most types of Upvc window and door profiles once used. The gasket pushes snugly into the groove of the profile system and when fitted correctly it will remain in place for years of trouble-free installation. The new rubber gasket provides a water tight and draught proof seal to Upvc windows and doors. 

The rubber gasket is able to be compressed. This enables it to cover the many different gap seals required to suit the Upvc systems used in the double-glazing industry over the last two to three decades that are now obsolete. 

White colour TPR bubble gasket.

  • Rubber gasket is quick and easy to fit. It can be greatly compressed for use in many variations of Upvc systems
  • The rubber gasket is only available in black. The old white gaskets that were once made are now obsolete
  • All the gaskets shown on this listing are sold in 6 metre quantity increments and will be supplied in a continuous length. For example, if you order a quantity of x2 then you will receive 12 metres. A quantity of x3 would be 18 metres and so on up to a maximum of 150 linear metres (a quantity of x25). Shorter increments are not available.
  • The gasket comes with a silicone lubricant on it which enables it to slide into the Upvc aperture and maintain its flexibility whilst stored
  • Returns back to its original shape after compression
  • Easily cut to size with household scissors
  • This is a water-tight and draught tight seal

These gaskets are sold in 6 metre quantity increments and are shipped as a single, continuous length. 6 metres will generally go around either the opening door sash or, alternatively, the outer frame of a standard size Upvc door system.

Fitting tip: Gasket can be neatly cut to size with sharp household scissors. It is best to start at the centre of the top rail (at the top of the door or window) because this is normally the area that receives the least water penetration and driving winds. This means that the gasket at the bottom of the window or door is always one continuous piece. Gaskets can be bonded together, along with the Upvc profile, with a discreet blob of superglue and this will be of no detriment to it.

More Information

More Information


Write Your Own Review
You're reviewing:Upvc Rubber Gasket Bubble Weather Draught Seal Window Door White
Your Rating