Upvc Door Bottom Threshold Rail Kick Strip 850mm Long Aluminium

GREF: 2540-2541

Review this product

Upvc Aluminium kick bar protection door strip that fits to the bottom upvc rail to prevent breakage and marking . Easily fits to all types of doors and comes with fixing screws and is a 850mm long length in either gold or silver finish.

Availability: In stock

Upvc Door Bottom Threshold Rail Kick Strip 850mm Long Aluminium is available for purchase in increments of 1

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

UPVC Door Aluminium Kick Bar Protection Strip Prevents Damage & Repairs Broken Threshold Bottom Rail Gold & Silver

  • Colour: Gold Or Silver Matt Finished Aluminium Strip
  • Overall Length: 850mm (long enough to fit most doors over 1 metre width overall)
  • Overall Width: 22mm
  • Operation: Face fixed to external face of opening door using screws (4 number supplied & will require plate pre drilling to suit)
  • Comes complete with 4 optional fixing screws N:B for best results you may need to counter sink said screws into the alunimum plate as you wish.
  • Can easily be butted upto either end with another length of bar for overlarge apertures and french door openings
  • Sold in 850mm lengths only. Larger apertures will require an additional strip/s which can be butted up to each other for longer coverage.

This product can be trimmed with a saw to suit your door size. The 850mm dimension is usually more than large enough for even an over-sized door and can do a door up to an overall width dimension of about 1 metre. 

Fitting tip: Measure & cut the strip to fit between the door outer frame uprights (it does not matter if the bar is not a tight fit between as it is the middle of the door that is the highest point of wear & tear. Equally mark out the 4 fixing screw lugs positions along the  purpose made V groove drill port line. Drill a 3mm hole through the strip or use a battery screw driver with a cross head end to drive the self-drilling screws in. For best results the bar should finish approx 5mm from each end of the door frame when closed. This will allow for any expansion / movement that you may experience over time. The 4no supplied fixing screws can be counter sunk into the aluminimum kick plate if so desired to give a flush finish if you so desire.

Gref 2540-2541
Brand Gardinia
Backset No
Deadbolts No
Faceplate Dimensions No
Hooks No
Mushrooms No
Pinbolts No
PZ (Spindle To Key) No
Rollers No
Screw Centres No
Spindle Size No
Type No
Patio Screw Fix No
Locking Types No
Keep Code No

Write Your Own Review

You're reviewing: Upvc Door Bottom Threshold Rail Kick Strip 850mm Long Aluminium

How do you rate this product? *

  1 star 2 stars 3 stars 4 stars 5 stars


No Forum Topics about this product