Roto Corner Drive Connector Tilt Turn Drive Links Top Or Bottom With P Cam

In stock
Gref
971
£13.99
Roto Corner Drive Connector Tilt Turn Drive Links Top Or Bottom With P Cam is available to buy in increments of 1
Roto corner drive connector tilt turn element top or Bottom Linkage with a mushroom cam lock point. This is the top or bottom corner connector linkage part that is screwed to the tilt turn gearing and allows the window to tilt and lock.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Roto Top & Bottom Corner Connector Tilt Turn Linkage With P Cam Lock Point

This is the Roto top or bottom corner connector linkage part with a mushroom cam bolt that acts as either a tilt plate bottom pivot point or alternatively a locking cam security point that is screwed to the tilt turn gearing and allows the window to tilt. The shown corner drive connector can be used on either the top or bottom of the window and as long as you make sure there are enough connector teeth under the drive gear mechanism you should be able to cut the existing drive gear to suit the new corner replacement.

You will find that over the years that the tilt turn corner elements used has varied and is likely that if yours is different it is now obsolete. However the corner connector teeth on this new Roto part will be compatible with the existing gearing as long as it is replacing a corner part that is not longer than this so there are enough linkage points still to connect to if trimmed to suit with an hacksaw.

Unfortunately the old tilt turn gearing parts are now becoming obsolete and are no longer used by modern fabricators so you need to realise that some adaption work may be necessary to carry out a successful repair that this new part may allow.

Priced & Sold in singles I:E 1X Xorner Extension

Fitting tip; the new Roto corner cam has a pair of plastic nibs that protrude and assumes that the fabricator will create a purpose made hole in the drive gear lock for these to go through. However this is difficult to achieve in situ therefore we have provided an optional connector plate that allows you to join the 2 parts together by firstly cutting the nibs off with a sharp craft knife ar wood chisel thus allowing the faceplate to sit flush and achieving a firm connection once the plate is screwed over and in place.

Fits the Roto drive Gears Search for : Roto Tilt Turn Drive Gear E Cam Lock Points Various Sizes

roto-nib

More Information
Description

Roto Top & Bottom Corner Connector Tilt Turn Linkage With P Cam Lock Point

This is the Roto top or bottom corner connector linkage part with a mushroom cam bolt that acts as either a tilt plate bottom pivot point or alternatively a locking cam security point that is screwed to the tilt turn gearing and allows the window to tilt. The shown corner drive connector can be used on either the top or bottom of the window and as long as you make sure there are enough connector teeth under the drive gear mechanism you should be able to cut the existing drive gear to suit the new corner replacement.

You will find that over the years that the tilt turn corner elements used has varied and is likely that if yours is different it is now obsolete. However the corner connector teeth on this new Roto part will be compatible with the existing gearing as long as it is replacing a corner part that is not longer than this so there are enough linkage points still to connect to if trimmed to suit with an hacksaw.

Unfortunately the old tilt turn gearing parts are now becoming obsolete and are no longer used by modern fabricators so you need to realise that some adaption work may be necessary to carry out a successful repair that this new part may allow.

Priced & Sold in singles I:E 1X Xorner Extension

Fitting tip; the new Roto corner cam has a pair of plastic nibs that protrude and assumes that the fabricator will create a purpose made hole in the drive gear lock for these to go through. However this is difficult to achieve in situ therefore we have provided an optional connector plate that allows you to join the 2 parts together by firstly cutting the nibs off with a sharp craft knife ar wood chisel thus allowing the faceplate to sit flush and achieving a firm connection once the plate is screwed over and in place.

Fits the Roto drive Gears Search for : Roto Tilt Turn Drive Gear E Cam Lock Points Various Sizes

roto-nib

Gref 971
Brand Roto
Write Your Own Review
You're reviewing:Roto Corner Drive Connector Tilt Turn Drive Links Top Or Bottom With P Cam
Your Rating

You may also be interested in the following product(s)