Free UK Delivery* Available

Profile 22 Upvc Rubber Gasket Bubble Flipper Draught Seal White

In stock

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10+ save 15%
  • Large Stock
  • Free UK
  • Expert

Profile 22 Upvc Rubber Gasket Bubble Flipper Weather Draught Seal B323, Sold in 6 Metre Increments, White Version

This is the white version (our part number 4230) of the Profile 22 Rubber Gasket. If your require the black version, search for our part number 3821.

The Profile 22 rubber gasket has been designed with both a bubble shape and also a flipper upstand leg. It can be used to replace the worn out or damaged rubber gaskets commonly found on the popular profile 22 Upvc window and doors once used. The gasket pushes snugly into the groove of the profile system and when fitted correctly it will remain in place for years of trouble-free installation. The new rubber gasket provides a water tight and draught proof seal to Upvc windows and doors.

The rubber gasket can also be compressed. This enables it to cover the many different gap seals required to suit the Upvc systems used in the double glazing industry over the last two to three decades, which are now obsolete. The unique flipper protruding upstand also provides another weather seal to the door or window to increase the water tight seal.

  • All the gaskets shown on this listing are sold in 6 metre quantity increments and will be supplied in a continious length. For example, if you order a quantity of x2 then you will receive 12 metres. A quantity of x3 would be 18 metres and so on upto a maximum of 150 linear metres (a quantity of x25). Increments shorter than 6 metres are not available.
  • The gasket comes with a silicone lubricant on it which enables it to slide into the Upvc aperture and maintain its flexibility whilst stored
  • Easily cut to size with household scissors

These gaskets are sold in 6 metre quantity increments and are shipped as a single, continuous length. 6 metres will generally go around either the opening door sash or, alternatively, the outer frame of a standard size Upvc door system.

Fitting tip: Gasket can be neatly cut to size with sharp household scissors. It is best to start at the centre of the top rail (at the top of the door or window) because this is normally the area that receives the least water penetration and driving winds. This means that the gasket at the bottom of the window or door is always one continuous piece. Gaskets can be bonded together, along with the Upvc profile, with a discreet blob of superglue and this will be of no detriment to it.

More Information

More Information
BrandProfile 22


Write Your Own Review
You're reviewing:Profile 22 Upvc Rubber Gasket Bubble Flipper Draught Seal White
Your Rating