Profile 22 Rubber Gasket Black Bubble Draught Seal 1810
In stock
Gref
4263
£12.26
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10+ save 15%
-
Large Stock
Holdings - Free UK
Delivery* - Expert
Support
Free UK Delivery* Available
Profile 22 Upvc Rubber Gasket Round Black Bubble Weather Draught Seal 1810 6mtr Bundle Elongated Shoe
The 1810 Profile 22 black colour rubber gasket has been designed with a round bubble shape but the shoe that sits in the upvc profile has a slightly longer length neck to it to allow it to sit in the profile better. It can be used to replace the worn out or damaged rubber gaskets commonly found on the popular profile 22 Upvc window and doors once used. The gasket is easily fitted & pushes snugly into the groove of the profile system and when fitted correctly it will remain in place for years of trouble-free installation. The new rubber gasket provides a water tight and draught proof seal to renew the upvc windows and doors.
The rubber gasket can also be compressed. This enables it to cover the many different gap seals required to suit the Upvc systems used in the double glazing industry over the last two to three decades, which are now obsolete. The unique flipper protruding upstand also provides another weather seal to the door or window to increase the water tight seal.
- All the gaskets shown on this listing are sold in 6 metre quantity increments and will be supplied in a continious length. For example, if you order a quantity of x2 then you will receive 12 metres. A quantity of x3 would be 18 metres and so on upto a maximum of 150 linear metres (a quantity of x25). Increments shorter than 6 metres are not available.
- The gasket comes with a silicone lubricant on it which enables it to slide into the Upvc aperture and maintain its flexibility whilst stored
- Easily cut to size with household scissors
These gaskets are sold in 6 metre quantity increments and are shipped as a single, continuous length. 6 metres will generally go around either the opening door sash or, alternatively, the outer frame of a standard size Upvc door system.
Fitting tip: Gasket can be neatly cut to size with sharp household scissors. It is best to start at the centre of the top rail (at the top of the door or window) because this is normally the area that receives the least water penetration and driving winds. This means that the gasket at the bottom of the window or door is always one continuous piece. Gaskets can be bonded together, along with the Upvc profile, with a discreet blob of superglue and this will be of no detriment to it.
More Information
| Gref | 4263 |
|---|---|
| Brand | Profile 22 |
Reviews
Write Your Own Review
Apply today to benefit from trade discounts across all our product range.
