Millenco Upvc Door Lock 3 Hook 2 Bolt No Cam 35 Backset 117pz MA51115A

In stock
Gref
2542
£136.17
Millenco Upvc Door Lock 3 Hook 2 Bolt No Cam 35 Backset 117pz MA51115A is available to buy in increments of 1

Millenco Mantis1 3 Hooks 2 D/Bolts zero rollers 35mm B/Set 117mm Pz MA51115A UPVC Multipoint door locking mechanism mantis 1, 3 hooks go up Deadbolts to top & bottom hooks,and was often used on flush fitting door sashes such as composite or timber door systems.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Millenco MA51115A 3 Hook 2 Dead Bolt No Roller Cams 35mm Backset 117mm PZ Mantis 1 Multipoint Door Lock

  • A - Spindle to Key: 117 and 85mm
  • B - Backset: 35mm
  • C - Op Type: Lever/Lever
  • D - Locking Points: 3 Hooks and 2 Deadbolts. Zero Roller Cams 
  • E - Faceplate Dimension: 16mm
  • F - Can be used to fit to the wider 24mm and 44mm cover faceplates sometimes used with this lock

What You Will Receive:

1 X Full length locking mechanism

This is the Mantis 1 Millenco 117mm PZ door lock which has zero Roller Cams whilst still having 3 Hooks and 2 Deadbolts. This lock was often used on doors with a flush fitting opening door sash vent either in a composite or timber door system. As the Hooks and Deadbolts are able to fully retract this allows the lock to be used on these systems where as the more common lock with 2 Roller Cams will not be able to do so.

Fitting Tip: You will also find that this lock was often fitted with either a 24mm or 44mm cover faceplate to suit the specific door sash and outer frame to be used. In this scenario you will need to remove the existing cover plate on the existing door lock to find the thinner linkage faceplate underneath.

The new replacement Millenco lock then needs the silver plated 16mm faceplate removing so that the wider 24mm or 44mm plate can then be attached to the new lock. (It is likely that the said smaller linkage plate will require trimming to fit to the existing cover plate as that will of been already cut to suit your specific door height. This is not a difficult job and needs a logical approach only and a screwdriver and hacksaw.

The overall length of the lock faceplate shown (OL: in attached detailed dimensions file) is simply trimmed down at the ends with a hacksaw to suit the length of your own personal door.

More Information
Description

Millenco MA51115A 3 Hook 2 Dead Bolt No Roller Cams 35mm Backset 117mm PZ Mantis 1 Multipoint Door Lock

  • A - Spindle to Key: 117 and 85mm
  • B - Backset: 35mm
  • C - Op Type: Lever/Lever
  • D - Locking Points: 3 Hooks and 2 Deadbolts. Zero Roller Cams 
  • E - Faceplate Dimension: 16mm
  • F - Can be used to fit to the wider 24mm and 44mm cover faceplates sometimes used with this lock

What You Will Receive:

1 X Full length locking mechanism

This is the Mantis 1 Millenco 117mm PZ door lock which has zero Roller Cams whilst still having 3 Hooks and 2 Deadbolts. This lock was often used on doors with a flush fitting opening door sash vent either in a composite or timber door system. As the Hooks and Deadbolts are able to fully retract this allows the lock to be used on these systems where as the more common lock with 2 Roller Cams will not be able to do so.

Fitting Tip: You will also find that this lock was often fitted with either a 24mm or 44mm cover faceplate to suit the specific door sash and outer frame to be used. In this scenario you will need to remove the existing cover plate on the existing door lock to find the thinner linkage faceplate underneath.

The new replacement Millenco lock then needs the silver plated 16mm faceplate removing so that the wider 24mm or 44mm plate can then be attached to the new lock. (It is likely that the said smaller linkage plate will require trimming to fit to the existing cover plate as that will of been already cut to suit your specific door height. This is not a difficult job and needs a logical approach only and a screwdriver and hacksaw.

The overall length of the lock faceplate shown (OL: in attached detailed dimensions file) is simply trimmed down at the ends with a hacksaw to suit the length of your own personal door.

Gref 2542
Choose Colour White Patio Handle Slim Ext Side
Brand Millenco
PZ (Spindle To Key) 117mm
Backset 35mm
Hooks 3
Deadbolts 2
Faceplate Dimensions 16mm
Write Your Own Review
You're reviewing:Millenco Upvc Door Lock 3 Hook 2 Bolt No Cam 35 Backset 117pz MA51115A
Your Rating

You may also be interested in the following product(s)