Millenco Mantis 3 Door Lock 3 Hook 2 Dead Bolt 2 Roller 35mm Backset 92pz

In stock
Gref
622
£82.36
Millenco Mantis 3 Door Lock 3 Hook 2 Dead Bolt 2 Roller 35mm Backset 92pz is available to buy in increments of 1

This is the Millenco Mantis 3 Multipoint door locking mechanism with 3 Hooks, 2 Deadbolts, 2 Rollers, 35mm Backset and a 92 & 62mm PZ. The top and bottom hooks go upwards and the centre hook goes downwards.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Millenco Upvc Door Lock Mantis 92pz Hooks & Dead Bolts

A - Spindle to Key: 92 & 62mm
B - Backset: 35mm
C - Op Type: Lever/Lever
D - Locking Points: 3 Hooks, 2 Deadbolts
E - Faceplate Dimension: 16mm

What you will receive:

1 X Full length locking mechanism.

On some versions of Millenco locks you may find that the hooks are in a slightly different position. If this is the case then the hook boxes and keeps may need to move up approximately 20mm to suit the new one which should not prove too much of an issue, although you might need to extend/move the keeps and routing slots etc. You should find that the centre lock case is in exactly the same place.

You might find that the centre lockcase on the new one is the exact same match as the existing one, in which case you could switch it over for the old one (only 3 screws to remove) which would then mean that all the hooks would remain as they were and restore the lock to full working order again.

The overall length of the lock faceplate shown can be trimmed down at the ends with a hacksaw to suit the length of your door.

More Information
Description

Millenco Upvc Door Lock Mantis 92pz Hooks & Dead Bolts

A - Spindle to Key: 92 & 62mm
B - Backset: 35mm
C - Op Type: Lever/Lever
D - Locking Points: 3 Hooks, 2 Deadbolts
E - Faceplate Dimension: 16mm

What you will receive:

1 X Full length locking mechanism.

On some versions of Millenco locks you may find that the hooks are in a slightly different position. If this is the case then the hook boxes and keeps may need to move up approximately 20mm to suit the new one which should not prove too much of an issue, although you might need to extend/move the keeps and routing slots etc. You should find that the centre lock case is in exactly the same place.

You might find that the centre lockcase on the new one is the exact same match as the existing one, in which case you could switch it over for the old one (only 3 screws to remove) which would then mean that all the hooks would remain as they were and restore the lock to full working order again.

The overall length of the lock faceplate shown can be trimmed down at the ends with a hacksaw to suit the length of your door.

Gref 622
Choose Colour White Patio Handle Slim Ext Side
Brand Millenco
PZ (Spindle To Key) 92mm
Backset 35mm
Rollers 2
Mushrooms 0
Hooks 3
Pinbolts 0
Deadbolts 2
Faceplate Dimensions 16mm
Write Your Own Review
You're reviewing:Millenco Mantis 3 Door Lock 3 Hook 2 Dead Bolt 2 Roller 35mm Backset 92pz
Your Rating