Mila Series 8 Espag Inline Gear Box 22mm 20mm Backset Coldseal Match HWE
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10 and more save 15%
Savings automatically applied at basket !!
(Must be the same part, colour & size to qualify)
Mila Series 8 Window Gearbox HWE3800 Or HWE3801 Match
- Also available in a non crop version
- Cam Height: 8mm
- Backset: 22mm or 20mm
- 205mm overall length of gearbox.
Mila Introduced this espag to replace the offset gearboxes widely used by Coldseal (see parts 929 & 930) commonly marked HWE3800 Or HWE3801 and is generally interchangeable instead of them. If using this part to replace the Coldseal offset handed version, as this new part is not offset you may have to very slightly widen the routed hole in the sash to accommodate it which is a simple job.
You may need to remove a small amount of PVC to allow the gearbox to fit neatly into the routed hole after which the gearbox will connect up to the extension rods just the same. In some cases Coldseal used to use a gearbox that did not have locking cams on it if this is the case simply ignore the ones on the new gearbox.
The size of the backset is usually stamped on the gearbox I:E 22 or 20, the 22mm is the most common.
|Backset||20 & 22mm|