Mila Door Lock Case Gear Box 25mm Backset Coldseal Match Latch Only

In stock
Gref
1196
£37.87
Mila Door Lock Case Gear Box 25mm Backset Coldseal Match Latch Only is available to buy in increments of 1

Mila 25mm BackSet Lockcase suits most old Mila / Coldseal / Swiftframe locks Door lock case only single spindle version with Latch but NO Deadbolt suits full length Mila multipoint door locks or Coldseal or Swiftframe replacement repair door lock part. N:B: If your gearbox has a offset crank linkage part on it please see the picture thumbnail under the main picture for details of how to accommodate it.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Mila 25mm Backset Lockcase Gear Box Mila Multilock and Swiftframe door lock match. Latch Only No Deadbolt

  • Spindle to Key: 92mm
  • Backset: 25mm
  • Op Type: Lever/Lever
  • Locking Points:
  • Connects to faceplate that has lockpoints
  • Has No deadbolt
What you will receive:
1 X Gearbox (No deadbolt)

Mila / Coldseal old style full length locks have been discontinued, however it is normally the lockcase that fails so by simply changing the old case you will be able to restore your lock to full operation again.

You may find that the faceplate is stamped with either Mila or Coldseal or Swiftframe on the faceplate, the door gear is the same and was manufactured by Mila.

Generally you will find that by replacing the centre gearbox that this is all you have to do, please note the lock has a latch but no deadbolt.

Note 1: This is the single spindle version with Latch but no deadbolt, the twin spindle version is discontinued and stocks are no longer available. However should your door be using the lower spindle from outside By replacing your existing handle set (match the dimensions of the internal handle) and drilling a spindle hole to line through with the internal spindle you will find that you will be able to use the top spindle hole from both inside & Outside.

Note 2: You will find that the door will operate exactly the same from both the inside and outside and you will find that you no longer need to use a key outside to disengage the latch on entry. The door will dead lock exactly the same as before.

Note 3: If your gearbox has a offset crank linkage part on it please see the picture thumbnail under the main picture for details of how to accomodate it.

How to change or convert a Mila UPVC Door lock:

More Information
Description

Mila 25mm Backset Lockcase Gear Box Mila Multilock and Swiftframe door lock match. Latch Only No Deadbolt

  • Spindle to Key: 92mm
  • Backset: 25mm
  • Op Type: Lever/Lever
  • Locking Points:
  • Connects to faceplate that has lockpoints
  • Has No deadbolt
What you will receive:
1 X Gearbox (No deadbolt)

Mila / Coldseal old style full length locks have been discontinued, however it is normally the lockcase that fails so by simply changing the old case you will be able to restore your lock to full operation again.

You may find that the faceplate is stamped with either Mila or Coldseal or Swiftframe on the faceplate, the door gear is the same and was manufactured by Mila.

Generally you will find that by replacing the centre gearbox that this is all you have to do, please note the lock has a latch but no deadbolt.

Note 1: This is the single spindle version with Latch but no deadbolt, the twin spindle version is discontinued and stocks are no longer available. However should your door be using the lower spindle from outside By replacing your existing handle set (match the dimensions of the internal handle) and drilling a spindle hole to line through with the internal spindle you will find that you will be able to use the top spindle hole from both inside & Outside.

Note 2: You will find that the door will operate exactly the same from both the inside and outside and you will find that you no longer need to use a key outside to disengage the latch on entry. The door will dead lock exactly the same as before.

Note 3: If your gearbox has a offset crank linkage part on it please see the picture thumbnail under the main picture for details of how to accomodate it.

How to change or convert a Mila UPVC Door lock:

Gref 1196
Choose Colour White Patio Handle Slim Ext Side
Brand Mila
Mechanism Type Gearbox Centre Case Only
PZ (Spindle To Key) 92mm
Backset 25mm
Rollers 0
Mushrooms 0
Hooks 0
Pinbolts 0
Deadbolts 0
Write Your Own Review
You're reviewing:Mila Door Lock Case Gear Box 25mm Backset Coldseal Match Latch Only
Your Rating