Mila 35mm Backset Lock Case Gear Box Coldseal Door Match Latch Only

In stock
Gref
1350
£43.27
Mila 35mm Backset Lock Case Gear Box Coldseal Door Match Latch Only is available to buy in increments of 1

Mila 35mm Backset Lock Case Gear Box Coldseal & Swiftframe Door Lock Match. Latch Only (No Deadbolt) suits full length Mila, Coldseal or Swiftframe multipoint door lock replacement repair parts. N:B: If your gearbox has an offset crank linkage part on it then please see the picture thumbnail under the main picture for details of how to accommodate it.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Mila 35mm Backset Lock Case Gear Box Coldseal & Swiftframe Door Lock Match. Latch Only (No Deadbolt)

  • Spindle to Key: 92mm
  • Backset: 35mm from lock faceplate to centre of square spindle hole
  • Op Type: Lever/Lever
  • Locking Points:¬†connects to faceplate that has lockpoints

What You Will Receive:

1 X Centre Gearbox

This lock can sometimes be confused with the Mila 4500 (see part 1753) but the linkage points are different and the 4500 lock has a metal spacer plate that attatches to it.The part 1350 door lock is a latch only and no deadbolt lock, if you require deadbolt also then please see part: 558

Mila / Coldseal old style full length locks have been discontinued, however it is normally the lockcase that fails so by simply changing the old case you will be able to restore your lock to full operation again.

You may find that the faceplate is stamped with either Mila or Coldseal or Swiftframe on the faceplate the door gear is the same and was manufactured by Mila, generally you will find that by replacing the centre gearbox that this is all you have to do.

Note 1: This is the single spindle version with latch but no deadbolt the twin spindle version is discontinued and stocks are no longer available. However should your door be using the lower spindle from outside By replacing your existing handle set (Match the dimensions of the internal handle) and drilling a spindle hole to line through with the internal spindle you will find that you will be able to use the top spindle hole from both inside & Outside.

Note 2: You will find that the door will operate exactly the same from both the inside and outside and you will find that you no longer need to use a key outside to disengage the latch on entry. The door will dead lock exactly the same as before.

Note 3: If your gearbox has a offset crank linkage part on it please see the picture thumbnail under the main picture for details of how to accomodate it.

How to change or convert a Mila UPVC Door lock:

More Information
Description

Mila 35mm Backset Lock Case Gear Box Coldseal & Swiftframe Door Lock Match. Latch Only (No Deadbolt)

  • Spindle to Key: 92mm
  • Backset: 35mm from lock faceplate to centre of square spindle hole
  • Op Type: Lever/Lever
  • Locking Points:¬†connects to faceplate that has lockpoints

What You Will Receive:

1 X Centre Gearbox

This lock can sometimes be confused with the Mila 4500 (see part 1753) but the linkage points are different and the 4500 lock has a metal spacer plate that attatches to it.The part 1350 door lock is a latch only and no deadbolt lock, if you require deadbolt also then please see part: 558

Mila / Coldseal old style full length locks have been discontinued, however it is normally the lockcase that fails so by simply changing the old case you will be able to restore your lock to full operation again.

You may find that the faceplate is stamped with either Mila or Coldseal or Swiftframe on the faceplate the door gear is the same and was manufactured by Mila, generally you will find that by replacing the centre gearbox that this is all you have to do.

Note 1: This is the single spindle version with latch but no deadbolt the twin spindle version is discontinued and stocks are no longer available. However should your door be using the lower spindle from outside By replacing your existing handle set (Match the dimensions of the internal handle) and drilling a spindle hole to line through with the internal spindle you will find that you will be able to use the top spindle hole from both inside & Outside.

Note 2: You will find that the door will operate exactly the same from both the inside and outside and you will find that you no longer need to use a key outside to disengage the latch on entry. The door will dead lock exactly the same as before.

Note 3: If your gearbox has a offset crank linkage part on it please see the picture thumbnail under the main picture for details of how to accomodate it.

How to change or convert a Mila UPVC Door lock:

Gref 1350
Choose Colour White Patio Handle Slim Ext Side
Brand Mila
Mechanism Type Gearbox Centre Case Only
PZ (Spindle To Key) 92mm
Backset 35mm
Rollers 0
Mushrooms 0
Hooks 0
Pinbolts 0
Deadbolts 0
Write Your Own Review
You're reviewing:Mila 35mm Backset Lock Case Gear Box Coldseal Door Match Latch Only
Your Rating