Maco Door Top Hat Lock Shoot Bolt Pair
In stock
Only %1 left
Gref
4975-4976
£22.47
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10+ save 15%
-
Large Stock
Holdings - Free UK
Delivery* - Expert
Support
Free UK mainland delivery
Maco Top Hat 16mm upvc door shoot bolt extension parts top and bottom corner with Mushroom roller cams. 2 sizes 300mm or 500mm
These are the Maco top hat specific compatible shoot bolt corners that when connected to the relevant Maco top hat french door type door lock that have connector teeth under the door faceplate allows them to be driven via the door lever mechanism. These shoot bolts are always a 16mm width only not 24mm & was widely used on the Maco french door mechanisms to securely anchor the slave door lock into the centre of the outer frame. it was also widely used on standard residential doors as an additional security feature to do the same.
The shoot bolts come in 2 size ranges for the top connecting bolt either 300mm long or 500mm long to choose the bottom shootbolt is always 120mm long.
The pair chosen comes with both the top & bottom length chosen included parts and the top bolt has a built in reverse mechanism to allow the bolt to operate in the same manner as the opposite corner bolt as the drive mechanism moces in the same direction. Each shoot bolt also has an additional mushroom roller cam attatched which can be ignored if wished or can be removed if required such as when it is going under a french door false mullion.
N:B faceplate width = 16mm not 24/16 like the door lock
Fitting tip: If you are replacing the older type door lock (approx pre 2010) it is likely that the new door lock mechanism teeth will move in the opposite direction therefore you will need to swap the top corner to the bottom and the bottom to the top to accomodate this. The size is identical so you will not need to cut anything.
Removing the mushroom roller cam: If you decide you need to remove the roller cam the quickest and easiest way is to turn the shoot bolt over to reveal the reverse of the roller cam. You will now see the cramped metal head that has been squased out to hold it in situ. Firmly hold the bolt in a vice or such like tool. Start with a small drill such as a 3mm and drill a hole approx 1mm deep in the centre, then drill a larger hole approx 8mm drill this will remove the squased head and if you then tap the reverse with a philips head screwdriver or such the roller cam will fall off. This will have no detriment to the shoot bolt and will work perfectly fine from there on in.
Maco top hat compatible shoot bolt pair
| Gref | 4975-4976 |
|---|---|
| Brand | Maco |
Orders for stock items received by 1pm (Mon – Fri, excluding bank holidays and holiday shutdowns) will be dispatched the same day by Royal Mail or Carrier. We also do our best to despatch any orders received after 1pm on the same day also, we just can’t guarantee orders received after this time will be dispatched the same day. Orders received on a Friday may be delayed by the weekend for delivery.
We deliver across all countries, with estimated arrival times as follows:
- UK Mainland: from next day, up to five working days depending on chosen shipping method
- Scottish Highlands: 3-5 working days
- Northern Ireland, Isle of Man and Isles of Scilly: 3-5 working days
- Republic of Ireland: Varies
- Channel Islands: 3-5 working days
- Europe: from 3-5 working days, up to 2-3 weeks depending on distance from UK
- Rest of the World: 2-3 weeks
To see more detailed information and a full breakdown of our courier services we use, please click here.
Write Your Own Review
Sign Up
Apply today to benefit from trade discounts across all our product range.
Apply today to benefit from trade discounts across all our product range.