GU Ferco Gearbox Door Lock Case Old Type Match 28mm 30mm Backset 92PZ

In stock
Gref
1637
£37.22
GU Ferco Gearbox Door Lock Case Old Type Match 28mm 30mm Backset 92PZ is available to buy in increments of 1

GU old style version mark 1 Upvc Door lock gearbox case with a 28mm or 30mm backset, suits the old style version 1 full length GU Ferco locks. All the Gu Ferco old lockcases have a 28mm backset but some lock strips had a 2mm outward kink on the faceplate which turns the backset to 30mm and you will often find that the faceplate was stamped 30mm. This gearbox will fit either version and restore the lock back to the original settings.

GU Ferco Old Original Version Lock Case 28mm and 30mm Match Backset 92mm PZ

  • A - Spindle to Key: 92mm
  • B - Backset: 28mm same as locks sometimes stamped 30mm
  • C - Op Type: Lever/Lever (N:B Split spindle versions are no longer available)
  • D - Locking Points: Connects to locking points
  • E - Faceplate Dimension: 16mm

What You Will Receive:

1 X Centre Gearbox

It is normally the centre gearbox that fails so if this is the case once you have replaced the broken one with the new one you should have a fully working door lock.

Note: 28 or 30mm backset lockcases work depending on the strip that you are fitting the replacement case to. All the GU Ferco old lockcases have a 28mm backset but some lock strips had a 2mm outward kink on the faceplate which turns the backset to 30mm and you will find that the faceplate was stamped 30mm. This gearbox will fit either version and restore the lock back to the original settings.

Gu Ferco Door Lock Case Latch Reversal Video:

More Information
Description

GU Ferco Old Original Version Lock Case 28mm and 30mm Match Backset 92mm PZ

  • A - Spindle to Key: 92mm
  • B - Backset: 28mm same as locks sometimes stamped 30mm
  • C - Op Type: Lever/Lever (N:B Split spindle versions are no longer available)
  • D - Locking Points: Connects to locking points
  • E - Faceplate Dimension: 16mm

What You Will Receive:

1 X Centre Gearbox

It is normally the centre gearbox that fails so if this is the case once you have replaced the broken one with the new one you should have a fully working door lock.

Note: 28 or 30mm backset lockcases work depending on the strip that you are fitting the replacement case to. All the GU Ferco old lockcases have a 28mm backset but some lock strips had a 2mm outward kink on the faceplate which turns the backset to 30mm and you will find that the faceplate was stamped 30mm. This gearbox will fit either version and restore the lock back to the original settings.

Gu Ferco Door Lock Case Latch Reversal Video:

Gref 1637
Choose Colour White Patio Handle Slim Ext Side
Brand GU Ferco
Mechanism Type Gearbox Centre Case Only
PZ (Spindle To Key) 92mm
Backset 28mm
Rollers 0
Mushrooms 0
Hooks 0
Pinbolts 0
Deadbolts 1
Write Your Own Review
You're reviewing:GU Ferco Gearbox Door Lock Case Old Type Match 28mm 30mm Backset 92PZ
Your Rating