Gardinia Door Latch Bolt Lock Keep M4 Grub Screw Bolt & Nut Kit Bag 5

In stock
Gref
2740
£3.84
Gardinia Door Latch Bolt Lock Keep M4 Grub Screw Bolt & Nut Kit Bag 5 is available to buy in increments of 1

Gardinia door latch striker keep replacement grub bolt screw adjustment plate pack of 5 nuts and bolts kit. Replaces lost and broken grub screws once fitted to upvc door keeps and latch plates M4 8mm bolt and flat nut plate.

Small M4 Grub Bolt Screw & Nut Door Latch Keep Adjustment Kit Replacement Pack Of 5 

  • Application: Holds door latch keep striker adjustment plates onto full lock plates
  • Screw Diameter: 4.0mm & matching flat nut
  • Screw Length 8mm
  • Sold in bags of 5 ( 5 x bolts & 5 x nuts)
  • Philips head screw head

The older door lock plate keeps were fitted with a little grub screw bolt and nut that allows the keep to be adjusted so that the opening sash can be pulled into the outer frame as required. Over time this upvc door latch keep bolt works loose as the door is open and closed and the nut drops down inside the upvc system and the little bolt falls out never to be seen again. These bolts have been sourced for such situations to be able to repair the full length keep plate.

Fitting tip: You will need to remove the full keep off the door frame so that you can insert the flat nut bolt to the underneath. We suggest that when you do this place a good piece of gaffer tape over the nut and onto the back of the keep to prevent the nut falling off again in future. Re-fit the keep to the door.

More Information
Gref 2740
Brand Gardinia
Write Your Own Review
You're reviewing:Gardinia Door Latch Bolt Lock Keep M4 Grub Screw Bolt & Nut Kit Bag 5
Your Rating