Free UK Delivery* Available

Brush Pile Grey Draught Brush Gasket Seal For Upvc 6.9mm x 7mm High

In stock
Gref
2723
£4.03

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10+ save 15%
  • Large Stock
    Holdings
  • Free UK
    Delivery*
  • Expert
    Support

Grey Brush Pile Draught Gasket Seal Suits Composite & Sliding Patio Doors 6.7mm Base X 7mm Height With Plastic Fin To Keep Pile Upright.

This wool pile draught gasket can be used to replace the worn out or damaged gaskets commonly found on composite doors upvc inline sliders and also vertical sliding window frames. The gasket slides into the groove in the profile system and when fitted correctly in place will remain in situation for years of trouble free installation. This wool pile gasket has a plastic fin inserted inside to help keep the wool pile upright longer and prevent it going flat with use. 

Provides a draught tight seal to upvc windows and doors. The wool pile draught strip gasket is able to be highly compressed therefore enabling it to cover the many different gap seals required to suit the rebate systems that have been used in the double glazing industry over the last 2 or 3 decades and that are now impossible to find the original gaskets for. This is sold in 1 metre increments and will be cut into a continuous length.

Sold in 1 metre increments so, for example, if you require 10 metres then you would order a quantity of 10.

  • Overall height is 7mm
  • Width of plastic shoe is 6.9mm
  • Thickness of plastic shoe is 0.75mm
  • Has Plastic Fin 

Fitting tip:

If you are retro fitting this gasket then you will need to cut a slot at one end of the profile about 50mm from the end and feed the plastic shoe into place. Once you have slid it down the long length, cut the gasket 70mm longer and feed it up the short bit (the 50mm end) and the 20mm extra length. Keep the full gasket tight up to each end. If you are worried about it popping out a tiny blob of superglue on the plastic shoe will hold it in place.

Grey brush pile 6.9mm plastic base by 7mm height with plastic fin draught seal gasket for composite doors inline sliding patios and also vertical sliding upvc window weather gasket seals. Provides a draught tight seal between the openers and frame. Available in grey brush type nylon seal. Sold in a 1 metre increment and will be in one continuous length. The plastic shoe that sits inside the outer frame slot is 6.9mm width X 0.75mm thick.

More Information
Gref2723
BrandGardinia

Orders for stock items received by 1pm (Mon – Fri, excluding bank holidays and holiday shutdowns) will be dispatched the same day by Royal Mail or Carrier. We also do our best to despatch any orders received after 1pm on the same day also, we just can’t guarantee orders received after this time will be dispatched the same day. Orders received on a Friday may be delayed by the weekend for delivery.

We deliver across all countries, with estimated arrival times as follows:

  • UK Mainland: from next day, up to five working days depending on chosen shipping method
  • Scottish Highlands: 3-5 working days
  • Northern Ireland, Isle of Man and Isles of Scilly: 3-5 working days
  • Republic of Ireland: Varies
  • Channel Islands: 3-5 working days
  • Europe: from 3-5 working days, up to 2-3 weeks depending on distance from UK
  • Rest of the World: 2-3 weeks

To see more detailed information and a full breakdown of our courier services we use, please click here.

Write Your Own Review
You're reviewing:Brush Pile Grey Draught Brush Gasket Seal For Upvc 6.9mm x 7mm High
Your Rating

Sign Up

Apply today to benefit from trade discounts across all our product range.

Sign up for a trade account