Brush Pile Grey Draught Brush Gasket Seal 6.9mm x 14mm High With Fin
In stock
Gref
4996
£15.28
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10+ save 15%
-
Large Stock
Holdings - Free UK
Delivery* - Expert
Support
Free UK mainland delivery
Grey Brush Pile Draught Gasket Seal, Suits Composite and Sliding Patio Doors, 6.9mm Wide Base, 14mm Overall Height, With centre plastic fin Sold in 6 Metre Increments.
- Overall height: 14mm
- Width of plastic shoe: 6.9mm
- Thickness of plastic shoe: 0.75mm
- Provides a draught tight seal to Upvc windows and doors
- With plastic fin in centre
This is the 6.9mm shoe 14mm high with the plastic fin centrally wool pile draught gasket can be used to replace the worn out or damaged gaskets commonly found on composite doors Upvc inline sliders and also vertical sliding window frames.
The centre fin allows the brush gasket to remin upright for longer and stop it going flat, It also provides an additional rain / weather seal for additional water tight sealing.
The gasket slides into the groove in the profile system and when fitted correctly in place will remain in situation for years of trouble free installation.
The wool pile draught strip gasket is able to be highly compressed, therefore enabling it to cover the many different obsolete gap seals required to suit the rebate systems that have been used in the double glazing industry over the last 2 or 3 decades.
All the gaskets shown on this listing are sold in 6 metre quantity increments and will be supplied in a continuous length. For example, if you order a quantity of x2 then you will receive 12 metres. A quantity of x3 would be 18 metres and so on.
Fitting Tip:
If you are retro fitting this gasket then you will need to cut a slot at one end of the profile, about 50mm from the end, and feed the plastic shoe into place. Once you have slid it down the long length, cut the gasket 70mm longer and feed it up the short bit (the 50mm end) and the 20mm extra length. Keep the full gasket tight up to each end if you are worried about it popping out, a tiny blob of superglue on the plastic shoe will hold it in place.
What You Will Receive:
1 X Length of gasket with centre plastic fin in 6 metre increments as determined by the quantity you purchase
Brush pile grey gasket 6.9 X 14mm high with centre fin
| Gref | 4996 |
|---|---|
| Brand | Stormguard |
Orders for stock items received by 1pm (Mon – Fri, excluding bank holidays and holiday shutdowns) will be dispatched the same day by Royal Mail or Carrier. We also do our best to despatch any orders received after 1pm on the same day also, we just can’t guarantee orders received after this time will be dispatched the same day. Orders received on a Friday may be delayed by the weekend for delivery.
We deliver across all countries, with estimated arrival times as follows:
- UK Mainland: from next day, up to five working days depending on chosen shipping method
- Scottish Highlands: 3-5 working days
- Northern Ireland, Isle of Man and Isles of Scilly: 3-5 working days
- Republic of Ireland: Varies
- Channel Islands: 3-5 working days
- Europe: from 3-5 working days, up to 2-3 weeks depending on distance from UK
- Rest of the World: 2-3 weeks
To see more detailed information and a full breakdown of our courier services we use, please click here.
Write Your Own Review
Sign Up
Apply today to benefit from trade discounts across all our product range.
Apply today to benefit from trade discounts across all our product range.