How to reverse the latch on a Winkhaus Scorpian gearbox to fit in a UPVC Door

Winkhaus door gearboxs are easy to reverse the latch on, it is simply the case of removing the screws, reversing the latch, then re screwing the screws in, the whole process should take a couple of minutes at the very most to complete.

[caption id="attachment_522" align="aligncenter" width="350"]Step 1 - Undo the screw at the back of the case allowing the latch to release Step 1 - Undo the screw at the back of the case allowing the latch to release[/caption] [caption id="attachment_523" align="aligncenter" width="350"]Step 2 - Turn the latch to the required position Step 2 - Turn the latch to the required position[/caption] [caption id="attachment_524" align="aligncenter" width="350"]Step 3 - Return the latch to the correct position Step 3 - Return the latch to the correct position[/caption] [caption id="attachment_525" align="aligncenter" width="350"]Optional: gor nightlatch reversal push the split pin to the required side Optional: for nightlatch reversal push the split pin to the required side[/caption]

Thats it, you have now reversed the latch on your Winkhaus Scorpian UPVC Door gearbox.