How to reverse the latch on a Winkhaus Cobra gearbox to fit in a UPVC Door

Winkhaus door gearboxs are easy to reverse the latch on, it is simply the case of removing the screws, reversing the latch, then re screwing the screws in, the whole process should take a couple of minutes at the very most to complete.

[caption id="attachment_513" align="aligncenter" width="350"]Step 1 - Undo screw to release the latch Step 1 - Undo screw to release the latch[/caption] [caption id="attachment_514" align="aligncenter" width="350"]Step 2 - Pull the latch out and reverse Step 2 - Pull the latch out and reverse[/caption] [caption id="attachment_515" align="aligncenter" width="350"]Step 3 - Re-tighten the screw Step 3 - Re-tighten the screw[/caption] [caption id="attachment_516" align="aligncenter" width="350"]For the night latch reversal you will need to push the small flat screw driver in to the hole pictured For the night latch reversal you will need to push the small flat screw driver in to the hole pictured[/caption] [caption id="attachment_517" align="aligncenter" width="350"]Pushing the split pin to the opposite side will change the hand Pushing the split pin to the opposite side will change the hand[/caption]

Thats it, you have now reversed the latch on your Winkhaus Cobra UPVC Door gearbox.