How to reverse the latch on an ERA Vectis door gearbox to fit in a UPVC Door

ERA Vectis UPVC Door Gearboxs are easy to reverse the latch on, it is simply the case of removing two screws, reversing the latch, then re screwing the screws in. Instructions for the Vectis Door Gearbox been used as a night latch can be found below.

Revering the latch on a normal ERA Vectis door gearbox:

[caption id="attachment_402" align="aligncenter" width="350"]Step 1 - Undo the two screws on the latch Step 1 - Undo the two screws on the latch[/caption] [caption id="attachment_403" align="aligncenter" width="350"]Step 2 - remove the latch Step 2 - remove the latch[/caption] [caption id="attachment_404" align="aligncenter" width="350"]Step 3 - return the latch and tighten the screws Step 3 - return the latch and tighten the screws[/caption]

How to reverse the latch on an ERA Vectis night latch door gearbox to fit in a UPVC Door

[caption id="attachment_405" align="aligncenter" width="350"]Step 1 - Undo the two screws on the latch to remove it Step 1 - Undo the two screws on the latch to remove it[/caption] [caption id="attachment_406" align="aligncenter" width="350"]Step 2 - insert a small flast screwdriver in the hole picture. Push down and turn 180 degrees to reverse the night latch function Step 2 - insert a small flast screwdriver in the hole picture. Push down and turn 180 degrees to reverse the night latch function[/caption] [caption id="attachment_407" align="aligncenter" width="350"]Step 3 - Return the latch and tighten the screw Step 3 - Return the latch and tighten the screw[/caption]