How to reverse the latch on an ERA Saracen door gearbox to fit in a UPVC Door

ERA Saracen UPVC Door Gearboxs are easy to reverse the latch on, it is simply the case of removing two screws, reversing the latch, then re screwing the screws in. This applies to both the normal latch and the night latch where instructions can be found below.

Reversing the latch on a normal ERA Saracen door gearbox:

[caption id="attachment_391" align="aligncenter" width="350"]Step 1 - undo the two screws on the latch Step 1 - undo the two screws on the latch[/caption] [caption id="attachment_392" align="aligncenter" width="350"]Step 2 - Remove the latch Step 2 - Remove the latch[/caption] [caption id="attachment_393" align="aligncenter" width="350"]Step 3 - Return the latch and tighten the screws Step 3 - Return the latch and tighten the screws[/caption]

Revering the latch on a ERA Saracen night latch door gearbox:

[caption id="attachment_394" align="aligncenter" width="350"]Step 1 - remove the two screws on the latch to remove it Step 1 - remove the two screws on the latch to remove it[/caption] [caption id="attachment_395" align="aligncenter" width="350"]Step 2 - insert a small flat screwdriver into the hole pictured. Push down and turn 180 degrees to reverse the nightlatch function Step 2 - insert a small flat screwdriver into the hole pictured. Push down and turn 180 degrees to reverse the nightlatch function[/caption] [caption id="attachment_396" align="aligncenter" width="350"]Step 3 - return the latch and tighten the screw Step 3 - return the latch and tighten the screw[/caption]