Ali Door Window Glazing Weather Rubber Gasket Seal AW860
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10+ save 15%
- Large Stock
Holdings - Free UK
Delivery* - Expert
Support
Buy More Save More!
The aw860 rubber e type push fit glazing gasket creates a weather performance seal and was used on ali residential door & window systems fitted over the last few decades. This gasket is fitted to slide over the purpose made shoe port to allow the gasket to sit round the profile extrusion used on the window or door systems so that when the opening door or window sash closes into the frame it neatly seals up and onto this gasket therefore creating an additional weather seal to ensure that any water of air will not pass and ensures the window or door openers achieve a very high weather performance.
The Gasket is sold in 6mtr increments which is usually enough to do one standard sized door or window opener
The gaskets are sold in 6 metre increment quantitys and is in one continuous length. 6 metres will generally go round either the opening door sash or alternatively the outer frame of a standard size Upvc door system.
Fitting tip: gasket can be neatly cut to size with sharp household scissors. When fitting for best weather performance it is best to start in the middle of the top rail at the top of the door or window as this is normally the least area of water penetration and driving winds so that the bottom of the door or window system is always in one continuous piece. Gaskets can be joined with a discreet blob of superglue which will adhere it together and also to the upvc profile with no detriment.
Gref | 4280 |
---|---|
Brand | Gardinia |