ABT St Helens Match Upvc Door Lock 32mm Backset 48pz with Snib
This is the ABT Door Lock replacement gearbox mechanism. It is a suitable replacement for the old St Helens UPVC door lock and connects to the top and bottom locking rods concealed in door jamb. It has a 48mm PZ and a 32mm backset. This is the with snib version door lock which has a small brass triangle latch that protrudes from the face of the door lock.
ABT St Helens Match Upvc Door Lock 32mm Backset 48pz With Snib
- Spindle to Key: 48mm
- Backset: 32mm
- Op Type: Lever/Lever
- Locking Points: Connects to Locking Points
- Faceplate Dimension: 22mm
- This is the ABT door lock with a snib
This product is also know as the ABT Gibbons York Mk 1 Door Lock. The actual measurement of the ABT door lock PZ is 47.5mm but is usually rounded up to 48mm, although sometimes it might be rounded down to 47mm & is the with snib version lock.
What is an ABT Snib Latch:
This version is the ABT door lock which has a snib. The snib is refered to as the brass triangle button that protrudes from the face of these locks and pushes in once it closes onto the frame latch keep on the door and springs out once the door is opened. This sprung snib latch prevents the handle been operated when the door is open so that you cannot inadvertently close the door with the lock points engaged causing them to smash against the frame keeps causing them to be damaged.
If you are looking for the ABT door lock without a snib then you can find this by searching for our part number: 2951 or by pasting the following into the search bar: ABT St Helens Match Upvc Door Lock 32mm Backset 48pz Without Snib.
How to reverse the latch on a ABT Door Gearbox:
|Choose Colour||White Patio Handle Slim Ext Side|
|Brand||ABT Gibbons Basta|
|Mechanism Type||Gearbox Centre Case Only|
|PZ (Spindle To Key)||48mm|