White Upvc Door Flat Reinforced Panel 28mm Thick Infill Foam Filled
In stock
Gref
2842
£47.66
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10+ save 15%
-
Large Stock
Holdings - Free UK
Delivery* - Expert
Support
Free UK Delivery* Available
Upvc Door Flat Infill Panel 28mm Thick White 750mm X 750mm
This is a heavy duty UV stable door panel used by our own installation teams since 1983 to glaze Upvc residential doors for both security and thermal instalation. The panel is easily cut to size using a fine cut timber panel saw, Jig saw or if prefered circular saw.
- Colour: White
- Width 750mm Height 750mm
- 28mm Thick
- Reinforced with 4mm MDF Sandwiched between foam thermal infill
Note that these door panels work to a 1mm-3mm tolerance (size increase) on either side in regards to the thickness dimensions. However, the thickness dimension will never be less that what size is purchased. This means that sometimes the panel can be slightly thicker than expected but the foam infill easily compresses to the desired size. This allows for a more snug fit meaning that it will be secure when installed and not loose.
If the foam infill is only on one side of the MDF then it is the 20mm panel. If the foam infill is on both sides of the MDF in equal amounts then it is the 24mm panel. If the foam infill is on both sides of the MDF with more on one side than the other, then it is the 28mm panel. Please see the photographs for a visual reference.
Fitting Tip: Upvc door panels are not difficult to replace with only a few basic skills required:
Measure the glazing panel / glass to be replaced noting both the width and height. Measure the top, bottom and middle (doing this ensures you do not get the wrong size as once you have cut it there is no going back).
If you do not have an existing panel or glass to work to then you need to measure the glazing area to be filled and allow an approximate 5mm fresh air gap all round to be able to slide the panel into. The Upvc will expand and move in hot weather so do not make it so tight it cannot move as this will increase the chance of the panel bowing cracking and delaminating.
Transfer the dimensions onto the panel to be cut and in the case of panels with a raised molding ensure these are centrally laid out to fit in the overall dimensions. N:B Leave the protective film on the panel for marking out and cutting to prevent any marks or scratches.
Tip: When you fit the panel just pull the tape back by about 30-40mm from all four sides in and out so that you do not trap the tape behind the gaskets when glazing up.
The panel is easily cut to size using a fine cut timber panel saw, Jig saw or if preferred circular saw.
Removing the beads is best done with a purpose made glazing bead knife. Our part number is 2143 and you may find our how to do YouTube Video "Replacing A Double Glazed Unit (DGU)" useful too.
Once cut to size offer the panel into the glazing area ensuring it is sat on the purpose made glazing packers that were there previously (noting the tips in the how to do video) and re-fit the glazing beads you earlier removed ensuring they go back in the same place and order you removed them.
Remember due to the bonding process of door panels they will always work to a 1-2mm depth tolerance. In doors that are particularly old it should be noted that the glazing gaskets will of lost some compression purely due to been compressed over such a long time and variation in seasons. If this is the issue you may need to also consider replacing the glazing gaskets as an option. Alternatively, a suitable all weather sealant may be additionally required.
Clean the panel and door down using either warm soapy water or Upvc cream cleaner for more stubborn marks and scuffs. Never clean with chemicals or abrasive materials.
Upvc door panel replacement infill panel to suit white Upvc 750mm X 750mm. This is a 28mm thick flat panel reinforced with 4mm MDF sandwiched between thick foam to provide excellent thermal insulation and security.
| Gref | 2842 |
|---|---|
| Brand | Gardinia |
Orders for stock items received by 1pm (Mon – Fri, excluding bank holidays and holiday shutdowns) will be dispatched the same day by Royal Mail or Carrier. We also do our best to despatch any orders received after 1pm on the same day also, we just can’t guarantee orders received after this time will be dispatched the same day. Orders received on a Friday may be delayed by the weekend for delivery.
We deliver across all countries, with estimated arrival times as follows:
- UK Mainland: from next day, up to five working days depending on chosen shipping method
- Scottish Highlands: 3-5 working days
- Northern Ireland, Isle of Man and Isles of Scilly: 3-5 working days
- Republic of Ireland: Varies
- Channel Islands: 3-5 working days
- Europe: from 3-5 working days, up to 2-3 weeks depending on distance from UK
- Rest of the World: 2-3 weeks
To see more detailed information and a full breakdown of our courier services we use, please click here.
Write Your Own Review
Sign Up
Apply today to benefit from trade discounts across all our product range.
Apply today to benefit from trade discounts across all our product range.