Mila Door Lock Case Gear Box 35mm Backset Twin Spindle Genuine Part

In stock
Mila Door Lock Case Gear Box 35mm Backset Twin Spindle Genuine Part is available to buy in increments of 1

This is the Mila 047201 genuine Mila part not a copy import 35mm Backset UPVC Door Lockcase Gearbox that suits most old Mila Multilock Coldseal & Swiftframe UPVC door locks. It is the TWIN Spindle Sprung version with a latch and deadbolt.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Mila 35mm Backset Upvc DoorLock Case Gear Box Twin Spindle Mila Multilock, Coldseal and Swiftframe Locks Mila 047201 Genuine Mila Part

  • Spindle to Key: 92mm and 70mm both are sprung 
  • Backset: 35mm
  • Op Type: Lever/Lever or Lever/Pad
  • Locking Points: Connects to locking points
  • This lock can replace either the single spindle or twin spindle version locks
  • This is a genuine Mila part and not a cheap copy import found at a very low price

What You Will Receive:

1 X Centre Gearbox

Mila, Coldseal and Swiftframe UPVC door locks replacement door lockcase gearbox repairs old style full length locks which have been discontinued.

It is normally the lockcase that fails so by simply changing the old case you will be able to restore your lock to full operation again.

It is quite easy to mix this up with the Mila 4500 door lock gearbox. However when you look at the detailed dimensional drawing shown below in the thumbnil pictures you will easily see that the linkage points are different and in different positions.

You may find that the faceplate is stamped with either Mila, Coldseal or Swiftframe on the faceplate  the door gear is the same and was manufactured by Mila in all cases. Generally you will find that by replacing the centre gearbox that this is all you have to do.

Note 1: This is the twin spindle version with a Latch and Deadbolt. The single spindle version is our part reference 558. However should your door be using the lower spindle from outside on the twin spindle version this is the correct one. If you are unsure then choose this version as it will operate either version of handles and is sprung to both spindles

Note 2: If your gearbox has a offset crank linkage part on it please see the picture thumbnail under the main picture for details of how to accomodate it.

How to change or convert a Mila UPVC door lock video help:

More Information
Gref 2188
Choose Colour White Patio Handle Slim Ext Side
Brand Mila
Mechanism Type Gearbox Centre Case Only
PZ (Spindle To Key) 92mm
Backset 35mm
Rollers 0
Mushrooms 0
Hooks 0
Pinbolts 0
Deadbolts 1
Faceplate Dimensions 16mm

Write Your Own Review
You're reviewing:Mila Door Lock Case Gear Box 35mm Backset Twin Spindle Genuine Part
Your Rating