Lockmaster Milamaster Gearbox 45mm Backset Lock Case Twin Spindle
Lockmaster 45mm BackSet Lock case Twin Spindle unsprung. suits full length Lockmaster & Mila masterlock door lock twin spindle
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10 and more save 15%
Savings automatically applied at basket !!
(Must be the same part, colour & size to qualify)
Lockmaster Milamaster 45mm Backset Lock Case Gear Box Twin 2 Spindle
- A - Spindle to Key: 92mm / 62mm
- B - Backset: 45mm
- C - Op Type: Lever/Lever
- D - Locking Points: Connects to locking points
- E - Face Plate Dim: 16mm Spacer not included
The existing 10mm spacer which fits between the lock case and the lock face plate must be reused. This lockcase allows you to use a lever pad handle. The pad handle is fitted outside and uses the lower spindle. The lower spindle allows the door lock to be locked and unlocked but will not operate the latch (snek) on the gearbox from outside without turning the key. The internal handle uses the top spindle which operates both the locks and the latch without the need to use the key. Please note that you can, if you wish, use the top spindle only with a matching handle both sides. Use sprung handles as the lockcase is unsprung.
Lockmaster Door Lock Case Latch Reversal:
|Choose Colour||White Patio Handle Slim Ext Side|
|Mechanism Type||Gearbox Centre Case Only|
|PZ (Spindle To Key)||92/62|