Laird Challenger 3D Composite Hinge White
ERA Laird Challenger 3D Composite Door Butt Hinge. White Suits Composite door systems. Composite door hinge fits to side of door slab to provide minimum sight lines.
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10 and more save 15%
Savings automatically applied at basket !!
(Must be the same part, colour & size to qualify)
ERA Laird Challenger 3D Composite Door Upvc White Butt Rebate Door Hinge
- Overall Length: 100mm
- Overall Width: 35mm to rebate
- Adjustable: Yes. 3mm vertical height adjustment, 2mm left to right adjustment
The hinges are universal and when you assemble them you simply spin them round to fit either the left or right handing of your door. Pin removal: You will find one end unscrews (gold grub screw). the opposite end is not a screw it is the full length hinge pin. it will just go round and round if you turn it with the allen key (it works against the grub screw for left to right adjustment). To lift the hinge remove the bottom cover cap and turn the Allen key anti-clockwise to wind the thread in. N:B you will need to do all the hinges by the same amount to move the door slab otherwise the other hinges will hold it in same place. We suggest 1 full reveloution at a time. Make sure the 2mm silver grub screw on the side is not holding in the pin (used for open out doors to stop pin been forced out). Then take a pair of long nose pliers and grab hold of the end of the gold grub screw. With some force pull out the pin it will come out in one piece.