Brush Pile Grey Draught Brush Gasket Seal For Upvc 6.9mm x 7mm High
Grey brush pile 6.9mm plastic base by 7mm height draught seal gasket for composite doors inline sliding patios and also vertical sliding upvc window weather gasket seals. Provides a draught tight seal between the openers and frame. Available in grey brush type nylon seal. Sold in a 1 metre increment and will be in one continuous length. The plastic shoe that sits inside the outer frame slot is 6.9mm width X 0.75mm thick.
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10 and more save 15%
Savings automatically applied at basket !!
(Must be the same part, colour & size to qualify)
Grey Brush Pile Draught Gasket Seal Suits Composite & Sliding Patio Doors 6.7mm Base X 7mm Height
This wool pile draught gasket can be used to replace the worn out or damaged gaskets commonly found on composite doors upvc inline sliders and also vertical sliding window frames. The gasket slides into the groove in the profile system and when fitted correctly in place will remain in situation for years of trouble free installation.
Provides a draught tight seal to upvc windows and doors. The wool pile draught strip gasket is able to be highly compressed therefore enabling it to cover the many different gap seals required to suit the rebate systems that have been used in the double glazing industry over the last 2 or 3 decades and that are now impossible to find the original gaskets for. This is sold in 1 metre increments & will be cut into one continuous length.
Sold in 1 metre increments therefore if you require 10 metres for instance you would order 10 number.
- overall height is 7mm
- Width of plastic shoe is 6.9mm
- Thickness of plastic shoe is 0.75mm