Fuhr Roto MVD340 MVD400 MVD500 R628 Upvc Door Lock Repair Kit 35mm

In stock
Gref
2140
£84.31
Fuhr Roto MVD340 MVD400 MVD500 R628 Upvc Door Lock Repair Kit 35mm is available to buy in increments of 1

Old Roto MVD upvc door lock replacement kit using the modern Fuhr special built centre gearbox with an optional split spindle, to suit centre section as can be seen in our images. Connects with top and bottom extensions to make full length door lock. Can replace the old Roto MVD500Roto MVD400, & also MVD340 door locks.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Roto MVD Door Lock 2 Roller 2 Mushroom Cam Repair Door Lock Kit Replaces Roto MVD500, MVD340, MVD400 and R628 Locks

  • A - Spindle to Key: 92mm (Split Spindle if required [see note below])
  • B - Backset: 35mm
  • C - Op Type: Lever/Lever or Lever/Pad 
  • D - Locking Points: Deadbolt, 2 Rollers and 2 Mushroom Cams with extension arms
  • E - Faceplate Dimension: 16mm
  • F - Includes optional frame keeps for all lock points if required. Screws are not included.

What You Will Receive:

1 X Centre Gearbox and Faceplate

2 X Extension arms (top and bottom)

4 X Keeps

This is the old Roto door lock replacement lock kit. It is designed with the modern Fuhr centre gearbox to be able to replace the old Roto MVD400, Roto MVD500 and Roto MVD340 and R628 UPVC door locks that are now obsolete. It will also replace the old Roto roller or flat cam locks that were once used. See the images for reference and information.

The kit comes with a Fuhr centre door lock and faceplate, with a top and bottom extension arm that connects to this to create a full height door lock. Each extension arm has 1 x roller and 1 x mushroom thus creating a 4 cam lock with a centre dead bolt and latch for increased security. The kit also comes with purpose made keeps for each lock point to suit most UPVC profiles with only a little work. If so desired you can use the existing frame keeps instead.

Fuhr Split Spindle Option Pack Our Part 2247:

The Fuhr split spindle pack allows the fuhr door lock to be operated as normal from inside the property when fitted using an inline pair of door handles & the Fuhr pack. However from the outside the door lock will not allow the latch to be operated via the handle. To move the latch in you must be a key holder and when the key is twisted it will move the latch in allowing the door to be opened.

This operation is particularly useful if you want to simply close the door behind you and be in another part of the house as you will be aware that the door can only be normally opened by someone whom has been given a key. Makes the door lock a key only entry system from outside when fitted to the relevant lock system.

If you currently have offset door handles (the outside handle lever is lower than the inside one) you will need to fit an inline pair of door handles (both sides use the same spindle) If this is the case simply email us your current screw to screw dimensions and we will advise you with a best fit replacement option.

If you have the old Roto 163mm screw fix dimension handle fitted this will also mean you need to replace the door handle as that handle could only ever be used with the old Roto MVD door lock which had a purpose made hole to allow for it and no other lock on the market allows for this. Our suggested replacement handle is Roto Match Upvc Door Handle 200mm Screw Fix 2 Hole Fix 92mm PZ Sprung our part 2446 this will require a top screw hole re-drilling as the handle is longer but is not a difficult job to do.

More Information
Gref 2140
Choose Colour White Patio Handle Slim Ext Side
Brand Roto
PZ (Spindle To Key) 92mm
Backset 35mm
Rollers 2
Mushrooms 2
Hooks 0
Pinbolts 0
Deadbolts 1
Faceplate Dimensions 16mm

Write Your Own Review
You're reviewing:Fuhr Roto MVD340 MVD400 MVD500 R628 Upvc Door Lock Repair Kit 35mm
Your Rating

You may also be interested in the following product(s)