Upvc Door Bottom Threshold Rail Kick Strip 850mm Long Aluminium
Upvc Aluminium kick bar protection door strip that fits to the bottom upvc rail to prevent breakage and marking . Easily fits to all types of doors and comes with fixing screws and is a 850mm long length in either gold or silver finish.
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10 and more save 15%
Savings automatically applied at basket !!
(Must be the same part, colour & size to qualify)
UPVC Door Aluminium Kick Bar Protection Strip Prevents Damage & Repairs Broken Threshold Bottom Rail Gold & Silver
- Colour: Gold Or Silver Matt Finished Aluminium Strip
- Overall Length: 850mm (long enough to fit most doors over 1 metre width overall)
- Overall Width: 22mm
- Operation: Face fixed to external face of opening door using screws (4 number supplied & will require plate pre drilling to suit)
- Comes complete with 4 optional fixing screws N:B for best results you may need to counter sink said screws into the alunimum plate as you wish.
- Can easily be butted upto either end with another length of bar for overlarge apertures and french door openings
- Sold in 850mm lengths only. Larger apertures will require an additional strip/s which can be butted up to each other for longer coverage.
This product can be trimmed with a saw to suit your door size. The 850mm dimension is usually more than large enough for even an over-sized door and can do a door up to an overall width dimension of about 1 metre.
Fitting tip: Measure & cut the strip to fit between the door outer frame uprights (it does not matter if the bar is not a tight fit between as it is the middle of the door that is the highest point of wear & tear. Equally mark out the 4 fixing screw lugs positions along the purpose made V groove drill port line. Drill a 3mm hole through the strip or use a battery screw driver with a cross head end to drive the self-drilling screws in. For best results the bar should finish approx 5mm from each end of the door frame when closed. This will allow for any expansion / movement that you may experience over time. The 4no supplied fixing screws can be counter sunk into the aluminimum kick plate if so desired to give a flush finish if you so desire.