Door Handle 8mm 2 Half Plates Spindle 120mm Long Incl 6mm Grub Screws
This is a replacement door handle spindle 8mm square and is split into 2 half plates that join together within the levers of the handle 120mm long steel galvanized rod to suit most common types of door handles on the market. The spindle can be cut to length with an hacksaw if required. Includes 2 X 6mm dia grub screw bolts
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10 and more save 15%
Savings automatically applied at basket !!
(Must be the same part, colour & size to qualify)
Gardinia Upvc Door Handle 8mm Spindle Split Into 2 120mm Long Steel Bar Galvanized Includes 2 X 6mm Dia Grub Fix Screws
- 1 x 8mm spindle 120mm long Supplied as 2 half plates which join together to make 1 X 8mm spindle
- Includes 2 number 6mm Diameter Grub Screw Bolts for both sides of the handle set
This is an 8mm square door handle spindle that is actually 2 number plates that join together and was commonoly used on Hoppe door handles that had a grub screw in the end of the handle lever. The grub screw has a sharp pointed end which when tightened up causes the 2 haly plates to be forced apart within the handle lever therefore causing them to trap the lever in place to prevent the handle levers been pulled off the baseplate when attacked as an additional security measure. The grub screws supplied are a 6mm diameter gauge screw which was often used but not exclusively. You therefore may choose to re-use the exsisting ones.
120mm long and will fit into most common types of current door handles. However it is always worth-while removing the existing ones and checking those dimensions. This spindle can easily be shortened by trimming with an hacksaw to suit your requirements.
Sold as a single spindle which includes 2no plates and 2no grub screws
| Description | Gardinia Upvc Door Handle 8mm Spindle Split Into 2 120mm Long Steel Bar Galvanized Includes 2 X 6mm Dia Grub Fix Screws
What You Will Receive:
1 X Spindle at size shown above
1 X Pair of grub screw bolts at size shown above
This is an 8mm square door handle spindle that is actually 2 number plates that join together and was commonoly used on Hoppe door handles that had a grub screw in the end of the handle lever. The grub screw has a sharp pointed end which when tightened up causes the 2 haly plates to be forced apart within the handle lever therefore causing them to trap the lever in place to prevent the handle levers been pulled off the baseplate when attacked as an additional security measure. The grub screws supplied are a 6mm diameter gauge screw which was often used but not exclusively. You therefore may choose to re-use the exsisting ones. Sold as a single spindle which includes 2no plates and 2no grub screws |
|---|---|
| Gref | 2874 |
| Brand | Gardinia |
| Choose Colour | Roto White Blade Fork Handle |
