Saracen Deadlock SC2 Shoot Bolt Rod Push Twist Fit Into Lock 300-430
This is a pair of shootbolts that suit the ERA Saracen Deadlock SC2 UPVC Window Lock Gearbox. Please take the time to view the "How to Measure" image we have provided to ensure that you choose the correct size to suit your requirements.
Buy More Save More!
- Order 3-5 save 5%
- Order 6-9 save 10%
- Order 10 and more save 15%
Savings automatically applied at basket !!
(Must be the same part, colour & size to qualify)
Saracen Deadlock SC2 Shoot Bolt Rod Push Twist Fit Into Lock
- Sash Sizes: 300 - 550mm
- Rod Length: 295mm
- This product is packaged in pairs
- Fits SC2 Gearbox, see part 412.
- N:B the size ranges shown are the overall sash vent size including both rods when fitted into the centre gearbox in situ Not the actual rod lengths.
The dimensions shown above are the overall opening sash vent length including both extension rods when connected to the gearbox. Not the actual rod lengths. Always measure the overall length of the rods including the centre gearbox when fitted into the window and in open position from bolt end to bolt end. THIS IS THE SIZE RANGE REQUIRED.
Please note that the picture is for illustration only and that different sizes are available as listed above.
Tip: To get to the shoot bolts that are inserted into the lock gearbox you will usually see that there are a plastic strip inserted either side of the lock gearbox and pushed into the u-shaped slot in the opener. These plastic inserts need removing to expose the bolts and you should be able to do this by carefully inserting something thin and flat but strong into the edge and flicking it out. The strips are just tapped into place and are not screwed but will be firmly inserted. Once removed you can then physically get hold of the shootbolt rods for removal. Do not throw the plastic inserts away as these are not able to be sourced as they were made to suit the specific profile fitted and will no longer be made.
|Choose Colour||Roto White Blade Fork Handle|