Mila Ideal Euro Rebate Door Hinge White 22mm Leg 9mm 11mm Or 13mm Axis

In stock
Gref
2747-2748-2887
£17.63
Mila Ideal Euro Rebate Door Hinge White 22mm Leg 9mm 11mm Or 13mm Axis is available to buy in increments of 1

Mila Ideal White Euro rebate door hinge, fits via sash euro grove and folds round door sash to suit. Hinge provides some adjustment via eccentric cams. Suits double glazed doors for upvc. The Mila Ideal hinge is available with a 9mm, 13mm or 11mm axis point that is critical to suit the profile system used. See the detailed dimension drawings to double check your actual dimensions.

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10 and more save 15%

Savings automatically applied at basket !!

(Must be the same part, colour & size to qualify)

Mila Ideal Upvc Door Euro Rebate Hinge White 9mm 13mm Axis & 11mm Axis Adjustable

White Mila Ideal Euro door hinge fits via sash euro grove and folds round door sash to suit.

  • 9mm Axis x 22mm sash leg 
  • 11mm Axis x 22mm sash leg 
  • 13mm Axis x 22mm sash leg
  • See detailed dimension drawings to show correct measurement points for above options 

These type of hinges became popular due to the fact that the part that fits onto the opening door sash is almost concealed from view as it sits inside the door euro-groove and does not protrude onto the face of the door like the more common flay thpe door hinges. These type of hinges were made in many variants and formats and it is important that you take the time to view the detailed dimension drawings and information given in particular the crucial critical dimension points we show in our drawings to ensure a successful fit.

What You Will Receive:

1 X Hinge

1 X Pin

2 X Cover caps


Fitting Tip: If you are using these hinges to replace the old type rebate door hinges which are no longer made the axis point critical dimensions must be worked to. If you use the frame part of the hinge as the datum point (basis for which you set up everything else from) you should be able to create a successful repair and restore your door back to working order. Using the 3 pre-drilled screw holes on the existing outer frame you will find that the hinge should be able to be screwed into place on the outer frame. Please note that you will also need to drill 2 holes for the fixing pins also on the repair hinge which may not have been on the old existing frame hinge. Once done the new hinge will fit in situ. You will then set the opening door sash part of the hinge up to sit round the door sash (adjusting it to wrap round snugly by spinning the plate round and if necessary adjusting the Allen key setting (make sure all the new hinges are set up to the same settings). Lastly screw the said plate into the groove within the door and ensure the screws are firmly fixed in place. Once done lift the door sash back onto the hinges and fix both parts together using the long hinge pins to do so. If necessary you can use the Allen key to make final adjustments to either slacken or tighten the door sash against the outer frame. place the hinge cover caps over to finish the installation.

If you have the even smaller axis point of 9mm then this indicates you have a very old door system and you will find that the door hinge you are trying to find is obsolete and your only option is to move to our Part: 2221-2246 which is the: Gardinia 3D Euro Rebate Door Hinge 22mm 9 to 13mm Rebate Adjustable.

More Information
Gref 2747-2748-2887
Brand Mila
Type Rebate
Choose Colour White Adjustable Euro Rebate 9mm-13mm Door Hinge
Write Your Own Review
You're reviewing:Mila Ideal Euro Rebate Door Hinge White 22mm Leg 9mm 11mm Or 13mm Axis
Your Rating