Free UK Delivery* Available

Maco Door Lock 35mm Backset Old Style Gear Box Centre Case 5STK

In stock
Gref
1781
£33.39

Buy More Save More!

  • Order 3-5 save 5%
  • Order 6-9 save 10%
  • Order 10+ save 15%
  • Large Stock
    Holdings
  • Free UK
    Delivery*
  • Expert
    Support

Maco 35mm Backset Gear Box Centre Door Lock Case Single Spindle Old 5STK 53431 or 56231 (Match/Replacement Part)

  • Spindle to Key: 92mm
  • Backset: 35mm
  • Op Type: Lever/Lever single spindle option only
  • Locking Points: Connects to locking points
  • Faceplate Dimensions: 16mm or 20mm faceplates (faceplate not included)

Note: Maco used this type of gear box on their original door locks but have later (since approximately mid-2010) updated the gearing system. 5STK followed by a combination of numbers was often stamped on the gear box label and if yours has this on it, there is a good chance it is a match. However, a comparison of the detailed dimension drawing in our page listing will be able to confirm this or not against your existing lock. The numbers that follow the 5STK were relevant to the type and combination of lock points and backset dimensions used by Maco has internal company batch codes but share the same gear box as per our listing.

Some versions were labelled 5ST & 5 STK. Some versions had 56231 but there were also many other combinations on the label.

Please check all the dimensions on the detailed dimension drawing (see under the main picture) and pay particular attention to the screw fixing dimensions as the old version and new version positions are different.

Please note: When reversing the latch do not move the spindle once the latch is removed, otherwise you will activate the spring and base retaining plate which will jump out of its housing, this will prevent lock from been operable. If you do this the only way to re-set this is to take the gear box cover off and put it back in place. This is a fiddly job, so please be careful. Once the latch is back in place and clicked home this will not occur.

For latch reversal instructions please open the video tab to see a demonstration.

What You Will Receive:

1 X Centre Gear Box

Maco Door lock case gear box only 35mm backset single spindle, suits full length Maco door locks. Maco used this type of gearbox on their original 53431 5st & 5stk door locks or 56231 was also on some versions of the lock label but have later updated the gearing system over the last few years.

More Information
Gref1781
BrandMaco
Mechanism TypeGearbox Centre Case Only
PZ (Spindle To Key)92mm
Backset35mm
Rollers0
Mushrooms0
Hooks0
Pinbolts0
Deadbolts1

Orders for stock items received by 1pm (Mon – Fri, excluding bank holidays and holiday shutdowns) will be dispatched the same day by Royal Mail or Carrier. We also do our best to despatch any orders received after 1pm on the same day also, we just can’t guarantee orders received after this time will be dispatched the same day. Orders received on a Friday may be delayed by the weekend for delivery.

We deliver across all countries, with estimated arrival times as follows:

  • UK Mainland: from next day, up to five working days depending on chosen shipping method
  • Scottish Highlands: 3-5 working days
  • Northern Ireland, Isle of Man and Isles of Scilly: 3-5 working days
  • Republic of Ireland: Varies
  • Channel Islands: 3-5 working days
  • Europe: from 3-5 working days, up to 2-3 weeks depending on distance from UK
  • Rest of the World: 2-3 weeks

To see more detailed information and a full breakdown of our courier services we use, please click here.

Write Your Own Review
You're reviewing:Maco Door Lock 35mm Backset Old Style Gear Box Centre Case 5STK
Your Rating

Sign Up

Apply today to benefit from trade discounts across all our product range.

Sign up for a trade account